Archives

now browsing by author

 

Sign Up for Periodic Updates

sign up

Go to the Sidebar to Sign Up!

We have just added a mailing list so that you may sign up for periodic updates on what is happening with the new organization. Just go to the sidebar on any page.

If you are already signed in to Facebook, your email information will be received by simply clicking the top sign up button labeled “Join our Mailing List”.  If you are not signed into Facebook, you will be routed to your sign in page on Facebook.

Or if you wish to register with an email different from the one which is registered with your Facebook account,  then use the manual sign up button labeled “or fill this out”.

sign up

Come on big boy, sign up for The Fast Ones!

We are glad you are here, and excited for the future, and looking forward to seeing your name and email in the list, and we hope to see you down the road at a vintage event.

Mechanical Ingenuity 

Where Are They All Today? Part 4, Final Edition on early MG TC Racing by Bob Watts

Harley Watts in 1955 with family and his MG TC

Where Are They All Today?  Part 4, Final Edition on early MG TC Racing by Bob Watts

I can add a few bits of updated information since this article was written circa 1997.  Harley’s chartreuse colored TC is still, as reported, in the possession of my brother, Larry, where it has been for about 25 years.  Its restoration was (slowly) initiated in the late 60s, and the car still remains in complete and solid and restorable condition.  The last time I remember it being licensed for the street must have been around 1961.  It was then still our daily transportation family car, and I remember running errands in it with my Mom at the wheel,  right about the time I started in public school.  For a long time there was a 1961 Ohio tag on its front bumper.  The picture here, taken the year before my birth, shows the car as I remember it.

The slightly tweaked frame as well as some other body parts of Harley’s first BRG TC was in our garage for the longest time.  I believe that Bob finally collected all of those parts and that they are in his possession. .Also, since this was written, none of the names mentioned in the article are with us any more, with the exception of possibly Chuck Dietrich, and Bob Watts.  The last time I saw Chuck was when Dad came to one of the SCCA races I drove at Mid Ohio around 1996.  Chuck was then around age 72, was also driving that day, and was still extremely competitive in his Formula Atlantic.  Dad passed away in 2004.  I saw Don Marsh at Dad’s  funeral, and not too many years after that I learned of Bob Fergus’ passing.  The last time I had seen Bob Fergus was in the early 90s at a vintage sports car race at Sebring, which I had gone to spectate.    What happened to the Fergus cars we have no idea.  Bob  Watts is now age 87, is and very active in the MG club in central Ohio.   Though he does not mention it in this article, Bob completed a meticulous restoration of his second TC in the late 90s, and he regularly drives it in casual vintage events.    –editor.

Final Edition – part 4 on MG TCs in Central Ohio by Bob Watts

Those original TCs are where now?  Ray Fisher’s TC was, as I recall, a cream colored car, and may have been traded on the Porsche 356 drophead which he drove for many years.  Don’t know where it might be now.  Tom Harrington’s TC was a cream car also.  I don’t know what happened to it.   I believe Roger Morgan owned it for a while.  Bob Fergus still has his BRG late 48 or 49 TC, and values it highly.  Phil Miller’s TC was re-painted “Bread Truck White” and sold, or traded on an Austin Healey 100.  I think the Italmecchanica blower was still on it when he disposed of it.  Dave Lee’s TC was red and is currently owned by Dave Stewart of Powell, Ohio and is a R.I.P. Tom Miller’s TC is red and was given to his daughter in California in early March 1996.  It was in need of total restoration, which was completed in 1997.  Don March still drives his black 48 TC with the Marshall blower, which was put on the car in 49 or 50.  Don’s second TC a cream colored car, not blown, was sold to someone in Cleveland in the mid 50s.  Harley Watts’ original BRG 48 TC was the one rolled by a friend coming down the hill at the Bellefontaine hillclimb in about 1954.  The engine ended up in his second TC, while most of the other parts, including fenders, are still in his garage or in my possession.  The engine from the second TC is in Harley’s garage.  His second TC was chartreuse (ugly) and was driven for many years as a family car.  His son Larry now has this car.  He replaced some wood in the tub, and painted the car BRG.  It has not been restored mechanically and is in storage.  Chuck Dietrich’s BRG TC, at last report, was owned by one of Chuck Henry’s sons in Bellevue, Ohio.

Of the nine TCs, the location of six are known, leaving three which are unknowns.  Six out of nine after 46 years isn’t bad.  If you include Harley Watts’ second TC it is seven out of ten.  Of the six, two are driven on occasion, two are R.I.P., one is a basket case without the body tub, and one probably in storage.  I expect the presently existing cars are likely to be around for considerably longer.

The 49 TC EXU purchased by R.G. Watts in Florida in 1952 was sold to “Herbie” Kountz, Ray Fisher’s brother-in-law, who raced it locally before moving to Massachusetts and taking the car along.  The present location is unknown.  My second TC was # 6557 purchased from the Columbus Sports Car Co. (Bob Fergus) in 1954.  It was a “trade-in” on an Austin Healey 100. This TC is the subject of the following “Restoration Manual”.

The MG TC was the beginning vehicle which launched the “Sports Car” boom as well as the SCCA in central Ohio.  Many more models and makes followed, most of which were British, including the XK 120, Austin Healey, Triumph, and the German Porsche.

Part 3

A Historical Perspective On Performance by Stirling Watts

alfadcoe

A Historical Perspective on Performance:  The 80s Versus Today

By Stirling Watts

At left:  Old school fuel delivery – Two 40mm Weber DCOE dual throat carburetors fitted to our 1959 Alfa Romeo Giulietta Sprint Veloce

What is History to One, is Fond Memories to Another!

Only recently has it come to my attention that my own recent personal experiences are, in the eyes of the younger adult generation in fact, history!   That which I remember about all the fun I ever had racing motorcycles and carts and automobiles is to me as clear as is any other memory.  To those who were not yet born in the early 80s, that which is to me the mundane might be to them quite interesting.   Without that realization I never would have considered assembling this article. I certainly feel amazed when I read all the material that Bob Watts has contributed about racing in the early 50s, just a few years before my own birth.  The memory of a world in which cars from the 1930s were an everyday experience is to me like fantasy, while to Bob it is just a memorable reality.

Though I am no detailed technical authority on the subject of internal combustion efficiency, I lived through the era of the 80s paying at least some attention to it, while the average citizen did not.  Not everything I write will reflect the truth as my world of experience is quite narrow, and I only state things as I remember them and with respect to that which I was privileged to witness.  When I started fooling around with increasing the performance of standard engines was during this period, the early 1980s.  It was a good period for the motoring hobbyist, for it was a period during which off- the- shelf engine  efficiency was still in its infancy.  Under my Dad’s tutelage, I gained the majority of my guidance from a classic book which is still in circulation in reprint, entitled “Tuning for Speed” by Phil Irving.  Irving was a renowned Australian motorcycle engine designer and tuner who knew and understood, through vast amounts of practical experience in racing as well as professional work as an engine designer, how to make standard engines perform to their maximum potential.  His experience was well documented  in this classic book, which I think was first published in the late 1940s.  “Tuning for Speed” by Phil Irving was my Dad’s Bible.

The Era of Federally Mandated Dismal Performance

Looking back on it, motorcycles and automobiles have advanced to a highly reliable and advanced state in the past 30 years.   In my childhood and teen years, performance cars were all leftovers from the 1960s. Late in the 70s and in the early 80s in the automotive world, government mandated pollution controls were initially a great hindrance to performance.  There was a brief period of low performance “high performance” vehicles.  In that era, the requirements imposed upon automotive manufacturers for cleaner air were in excess of the capabilities of existing technologies.  Such standards could only initially be met with adverse effects upon performance.  Rather than focusing on finding methods to increase combustion efficiency, automotive engineers were, at least  in the short term, compelled to use “band-aid” fixes which focused on a less efficient approach to cleaner exhaust air, namely, burning off the leftover gases after the fact,  as opposed to finding more advanced methods to improve combustion in the power cycle itself.  Evidence of that state of being behind the curve could be seen under the hood of virtually any common period car.  The plumbing under the hood of just about any car of the late 70s or early 80s  was almost mind boggling.  It was also a major confusion factor for even the best mechanics.   Fuel injection technology was still less than perfect.  Many manufacturers chose to continue to rely upon carburetor technology simply on the basis of cost control.  But meeting the clean air standards required more control of fuel mixture and delivery than could be delivered by traditional carburetion systems.   Hence, fuel and exhaust systems became extremely complex.  On top of all of that complexity was relatively poor performance with respect to what we see today.  Look, for example at the output specifications of a 1979 Chevrolet Corvette, or that of a 1979 Pontiac Trans Am.   I clearly remember renting a California model 1979 AMC sedan of some sort while on a business trip to San Diego.  I could not believe that people were willing to buy new cars with such dismal performance.  I felt similarly about a Ford Pinto I once rented for a couple of weeks in 1979.

The Advancement of motorcycle performance was less restricted by government interference.

Motorcycles did not suffer exactly the same fate of directly strangled performance, due to the fact that the EPA chose to attack motorcycles on a more relaxed and delayed schedule. But the motorcycle industry did in fact have its own set of government interference problems with which to deal in the 80s, including some market interference laws which compelled the big four Japanese firms to market 700cc machines in place of the already established 750cc standard.  Later in the decade of the 80s came also an “anti-horsepower “ movement, during which propositions were under consideration which threatened to limit the maximum performance by federal mandate.  “Horsepower kills” was the motto of the day.  Intelligent lobbying efforts eventually killed the proposed horsepower limitations.

As time went on and technology began to catch up with government mandated standards, engine efficiency improved.  This state of affairs led to the almost incredible state of reliability and performance which we witness today, and which the younger generation has no capacity to appreciate.   Before them e development of advanced engine and mixture control by computerized mapping, every single change or flow improvement made to an intake or exhaust system  resulted in an unknown and difficult to predict change in mixture requirements.  “Plug reading tests” in the field, combined with a developed understanding of and a good feel for understanding the various stages of a carburetor (main jet choice, needle choice, needle position choice, pilot jet choices, were necessary in order to be able to tweak maximum performance from a motor.  Few with the exception of those with excellent mentors and/or a wealth of experience really could properly tune a race motor.  Myself included, I witnessed this many times testing new motors at club racing events, at which I had wished my Dad had been present!  Only those with unlimited budgets had or have access to dynomometer facilities with which one can at least find an approximately correct setup before going to the track in a relatively casual manner.

Today’s Amazing State of Tuning and Efficiency

Today, with the exception of those who continue to enjoy vintage competition, those days are gone.  On the down side, there are probably few real tuners in this world anymore.  With computerized mapping controlling everything from fuel mixture under every possible load and engine speed condition, to real time changes in camshaft and ignition timing, also calculated as functions of load and engine speed, no real tuning ability is needed.  Today we can swap out and ECU with a different pre-assigned set of mapping functions, and completely change the output characteristics of a given engine.

Most impressive is for example the new Fiat engine used in the car currently known as the 500.  My son, Eric recently purchased an Abarth version.  We were surprised to learn that off-the-shelf performance improvements can be implemented by virtually anyone, by simply pulling out and replacing an ECU chip.  All of the tuning has already been done flawlessly and perfectly by someone else!  One can purchase a chip directly from Fiat engineering people which will change the mapping from the standard 160 bhp in Sport mode) to 200 bhp!  No intelligence required!  All for around $600!

Perhaps it is difficult to grasp just how amazing this is unless you have yourself attempted to adapt a new set of carburetors to an engine to which you have made other mechanical and airflow modifications.  Our 1959 Alfa Romeo Giulietta Sprint Veloce is a good example.  A few years back we discovered that the original dual double throat DCO3 Weber carburetors were completely worn out, such that with them it was no longer possible to balance the airflow between the cylinders.  We purchased a set of more modern DCOE Webers as a replacement.  Thanks to the skill of our friend Peter Smith, an experienced old school tuner (who by the way also was  the 1970 SCCA Can Am 2 Liter National Champion in a BMW powered Lola chassis), the newer DCOEs were finally brought into a state of tune which allows tolerable drivabilty.    But that was no small task!  It required repeated removal, modification, retesting, and rebalancing until the effort was perfected. More on the Alfa Sprint Veloce in a future post!

dcoe40ex

Complexities of a Weber 40 DCOE System

What Promises Does the Future Hold?

If you are much younger in years than the author, you might not have had the opportunity to grasp just how amazing is today’s technology.  Just imagine what another 30 years might do!  Some younger reader will, it is hoped, in the now seemingly far off year of  2043,be found writing fondly about the good old days in 2013, about how crude and undeveloped was technology in that era, perhaps back in the days when cars had wheels and internal combustion engines.   Happy Motoring!

Home

 

Common MG TC Modifications and Mechanical Issues in the early Racing Era – Part 3, by Bob Watts

Harley Watts in a 1953 SCCA hillclimb event in his MG TC

Part 3:  Common MG TC Modifications and Mechanical Issues in the early Racing Era

It’s difficult to separate Bob’s article into distinct segments, but this one tends to focus on the major mechanical issues with which TC racers had to deal in the mid 1950s.  I can recollect going along for the ride as a small boy on a few rescue missions similar to those recalled here by Bob in this article.  At left is Harley’s original TC, which was rolled (by another driver borrowing the car) and significantly damaged, in the very event at which this photo was taken.

I only reached the age of being able to recall specific memories near the tail end of Dad’s active automobile racing support activities.  I only vaguely remember Jaguars and Ferraris and Porsches and other exotica  in our driveway, and hanging around with my Dad in the shop, listening to grown-up talk about the automobiles they were working on, and getting to take fast test rides in exotic cars with my Dad at the wheel.  Only later in life did I learn to appreciate that what seemed like commonplace activity in my childhood was not common with other children of my generation.  Consequently it might be easier for me to appreciate these anecdotes, having been blessed with the opportunity to witness the tail end of an era which is now gone forever.  – editor.

About 1955 Bob Fergus was trading for various cars he wanted.  He traded for a chain drive Frazer-Nash and felt his side of the trade was worth much more, so a 1931 “C” type MH Montlhery Midget was thrown in to make up the difference!

Efforts to improve TC performance were made by Don Marsh, who installed a Marshall blower, and by Phil Miller who got Harley Watts to install his Italmechanics blower.  Ray Fisher also added a blower, and others raised the compression ratio, polished intake ports, installed larger valves, heavier valve springs, installed high compression pistons, larger SUs, changed SU jets and needles, installed a competition clutch, removed the air cleaner, installed a competition coil, changed spark plugs, reduced back pressure with a straight pipe, replaced rear wheels with 16” wire wheels, etc.  Also it should be noted the much quoted 54 hp if the XPAG engine  was on 72 octane gasoline, which was all that was available in England in late 1945.  “High test” pump gasoline here, was 87 octane.  The heavy, air scoop front fenders were sometimes replaced with shortened ’35 – ’36 Ford spare tire covers from the junk yard.  These were shortened to make skinny cycle fenders.  Weight reduction also included temporary removal of the windshield and bonnet side panels.  These later modifications were only for more serious competition.

Phil Miller’s supercharger made a noticeable difference ion the car’s performance.  I followed Phil in his TC to visit the Greiner Brothers on the east edge of Springfield the summer of 1950.  Following a noisy ride in a Mercedes 540K, we headed back to Columbus on Route 40.  Phil put his foot in it and I tried to  keep up in my Pontiac.  The speedometer hand in the Pontiac went out of sight behind a shield at an indicated 100 mph.  During much of the return ride the speedometer hand was out of sight.  I’m sure the speedometer was optimistic, however the TC would pull away seemingly at will.  I don’t know whether stronger valve springs had been installed on the TC engine, but Phil had to be running at or near 6000 rpm much of the time.  15.64 mph per 1000 rpm at 6000 rpm is about 95 mph.  The TC had to be running at or near this speed much of the 40 miles to Columbus.

TCs were driven hard and mechanical problems were accepted as normal.  Harley Watts with one or two others, probably Don Marsh, Bob Fergus, and/or Chuck Dietrich, late on a Sunday afternoon, called from Wapakoneta with a broken rear axle.  A spare axle, without the normally pressed on bearing carrier, was taken to him.  The broken stub had been removed by removing the opposite wheel and axle and pushing it out from the opposite side, possibly with a jack handle rod.  The replacement axle was installed after dark in an unlit gas station lot in a very short time.  The TC was promptly driven back to Columbus.  The bearing carrier was originally pressed onto the axle with some seven tons of pressure.  However the constant shock of up and down shifts, hard braking, over revs when airborne over bumps, such as railroads, etc., loosened this spline connection, and it became normal to accept the bearing carrier-axle spline connection to a finger tight sliding fit.  As a result, spare axles were usually were usually carried without the pressed on bearing carrier. A related problem was wet rear brakes from differential grease finding its way through the splined axle bearing carrier connection and past the grease seal  onto the inside of the brake drums, and also onto the rear wheel spokes.  Normal hard cornering threw the differential grease to the outside of the case with enough pressure to force it through the ineffective bronze return thrower also.  With these “leaks” onto the rear brake linings, rear brakes were often almost non- existent.  Frequent hard braking was known to burn the paint on the brake drums on all four wheels.

Occasional fuel pump failures caused spares to be carried.  Windshields were replaced often from rock damage, frequently from driving on gravel roads,  Aluminum rear plate engine supports cracked or broke from the shock of landing after aviating over a railroad crossing or other bumps as well as the general rough pavement.

At a Put-in-Bay race, a TC coming into town from the Cemetary on a rough, bumpy section of road, developed violent front axle tramp, so violent that one front tire hit and broke one cycle fender off.  Tire marks on the underside of the clamshell front fenders of hard driven TCs were not uncommon from similar front axle tramp.

Bishop cam steering was often not kept full of 140 weight “grease” or temporarily filled with chassis grease, and deteriorated rapidly.  Tompkins kits, when they became available, were enthusiastically adopted.  Hard driving required at least weekly, if not daily attention, to all lube points.

Tire wear was rapid.  Less than ten thousand miles of driving exuberantly was all it took to run Dunlops from new to bald.  Pirelli tires were discovered early on.  They were “stickier” and wore for many more miles.  There are still TCs around being driven with 40 year old Pirellis.  These tires were made in England.

Front wheel bearing replacement at frequent intervals was routine.  Chuck Dietrich replaced his after every race.  King pin replacement was done fairly often.

Stay tuned for the final segment – “Where are they all today?”

Part 2

MG TCs in Central Ohio, Part 2 – Sports Car Racing in the Early 50s

Newspaper.article.Harley@McDill.AFB. in'51

Part 2 – MG TCs in Columbus by Bob Watts

I have the original newspaper article shown at left, framed on my living room wall.  It touches on some of what Bob writes about in the continuation of the article below.  Harley (Dad) being the lead mechanic, Bob and Harley also shared driving duties to win their class at McDill  AFB in 1951 in the Fergus MG TC.  The local Columbus Dispatch published this article about the event in the Sports section.  At that time I was still a twinkle in my Mom and Dad’s eye (born in ’56), our brother Grayum was going on 2 years old, and Larry was born shortly thereafter in January of ’52   -editor.

Some ten or so TC owners in the Columbus area, as well as Chuck Dietrich from Sandusky, often toured rural Ohio on Sunday, avoiding the roads patrolled by the law.  Most of these roads were gravel with oiled strips in front of some farm homes as dust control.  These roads were not smooth or straight.  It was common to meet occasional oncoming traffic on such a road, and wonder why many would pull over to the side and stop.  Occasionally one would even seek out the ditch.  Having gotten some distance in front of the group on one occasion, and waiting at the end of a straight section of bumpy gravel road, the reason for the local driver to “make room” was revealed.  The front wheels of the oncoming TC were violently bouncing up and down and flopping about while the car came straight ahead.  It was obviously an accident about to happen and the prudent thing to do was to get out of the way.  The MG driver felt he was in complete control and could see no reason for the other driver’s reaction.

Cooperation between MG drivers was normal when problems arose.  In the summer of ’52, a group of mostly TCs was heading south on Rt. 104 from Columbus for a hillclimb near Bainbridge.  In my ’49 TC I was at the rear of the group.  Everyone else had passed a Buick,  but when I started around, he decided he was not going to allow me to pass him.  At close to 6000 rpm, I could not outrun him.  Bob Fergus saw what was happening from ahead.  He dropped back in his XK 120 (Jaguar), pointed to hi rear bumper for me to wind tail him.  I did, and he sucked the TC past the Buick with ease.  I don’t recall what rpm the TC was running but I soon backed off for fear I was about to blow the engine up.  It did not happen.

Summer driving meant bugs on the windshield, lots of them, frequently so thick there was a temptation to use a putty knife.  Windshield down with driver slid down in the seat allowed most of them to go overhead.  Upright seating meant bugs in the face and a toothpick to dislofge the bug shells from between the teeth.  Brooklands “deflectors” allowed better visibility without most of the bug problems.  Today’s insecticides have drastically reduced this as a problem.

Locally a “Grand Prix” road course was set up southeast of Columbus on country roads.  Traffic was light.  The course had a number of bends, several of which were fairly tight, several long straights and some rolling bends.  Good MG roads.  The Sheriff soon became aware of the “fun” .  Frequent efforts to catch the “speeders” took place but the rolling bends were not “Ford” roads. Police radio was not very good, and attempts at road blocks were always after the fact.  Sitting at Harley’s house and listening to the sirens was like listening to hounds chasing the fox.  The “hounds” never found which hole (garage) the fox had slipped into.  This sort of activity enhanced the reputation of the MG as being very fast, which it really wasn’t.  However the local speed limits were regularly badly fractured.  It was youthful fun, viewed by all participants as quite innocent.

Bob Fergus had quit selling Cadillacs and obtained the MG, Jaguar, Austin, etc. dealerships.  Initially he had no cars to sell, just literature to show what was available.  When you bought a car, you had the choice of going to New York to pick it up, or pay for delivery.  Shortly there was a TD and then an XK 120 demonstrator.  Bob Fergus and Harley Watts and others made numerous trips to New York to drive new cars back.   This quickly included Porsches.  “The Columbus Sports Car Co.” moved from several apartment garages on Auburn Ave. to a garage with a one car show room on Livingston Ave. to a new showroom on Northwest Blvd.  When new cars for display were not in hand, Bob’s TC and 35B Bugatti were there to see.

Meanwhile weekends were very active with hill climbs, regularity runs, rallies, and just finding MG roads and driving them. Harley Watts went to Watkins Glen in 1949 .  Bob Fergus began racing his TC at every opportunity.  Watkins Glen, through the town road course, for three years, Bryfan Tyddn, Giant’s Despair hill climb, Elkhart Lake (before Road America existed), McDill AFB in Tampa, Lockbourne AFB, Chanute Field in Illinois, and others.  The TC was driven to, and back from , every race, regardless of distance from home.  Almost everyone else did the same.  Harley Watts kept Bob’s TC running at its best.  Many thought he had a secret.  He did, he meticulously followed the English instructions for getting maximum performance.  Both Blower and Smith’s instructions for the several tuning stages of the XPAG engine were not published till 1952 and even then were not widely circulated.  The factory tuning stages for the XPAG engines were almost unknown locally at the time.  Harley had a copy and he just followed the instructions for getting maximum performance.  It worked!  Bob’s outstanding ability as a driver did the rest.

Bob also shared driving a 1500cc Fiat engine Siata with Dick irish, of Cleveland, at Vero beach, Florida in March 1952, the weekend before Sebring.  The Siata blew a head gasket and DNFd.  Cranking the engine with plugs removed squirted several columns of water some distance.  This was an airport race with much fine grime on the pavement.  Dust was blowing during the entire race and everything and everyone was covered with grit.  The head gasket was replaced in time for Sebring the following weekend.

The ’52 race was the second Sebring race, and the first twelve hour race.  The Fergus-Irish team were outstanding, finishing 3rd overall, behind a LeMans 2 liter Frazer-Nash, and XK 120M, 1st in theor class and 2nd or 3rd in the index of performance.  Cars behind them included a Ferrari 166, an XK 120, thre MGs, a Morgan, and the index winner a DB (Aston Martin).  R.G. Watts kept the lap chart, and where the top several cars were on the index of performance.  This was the slide rule era, before good stop watches, calculators or computers.  The Siata was raced both weekends with a substantial dent on one side from an accident in Tennessee while being driven from Cleveland to Florida.  After Sebring it was driven back to Cleveland.  Between the two races I purchased my first TC, an Ivory -49 EXU from Taylor Motors in Palm Beach.

Photographs and newspaper articles from this peiod are scattered through this section, with labels and a few explanations.

During this time period, Tom Miller purchased the former Malcolm Campbell Type 39A Bugatti from an English owner for about $1500.  His brother, Phil, bought a Type 37 from Tony Hogg, then in England.  Tony later came to the US and worked briefly for Bob Fergus.  He then moved on to California, where in time, he became editor of Road & Track magazine.  These two Bugattis together with the Fergus 35B were all owned by TC owners and were in Columbus at the same time.  Phil sold his Type 37 to a TC owner from New England who towed it back home behind the TC.  Unfortunately, no photos of the car are known to exist.

About 1955 Bob Fergus was trading…………..STAY TUNED for Part 3!

Part 1

MG TCs in Central Ohio – Part 1: Automobiles and Motoring in the late 40s by Bob Watts

Harley Watts, Bob Watts, Bob Fergus, Jaguar

Far right in the photo at left is the author of this article, Bob Watts, standing by  his brother (and my father) Harley Watts, and some other unidentified friends working on a Jaguar XK-120 race car owned by Harley’s co-driver, Bob Fergus, at an unidentified race event in 1953.

 

MG TCs in Central Ohio  by Bob Watts

A Historic Perspective

As a student at the Ohio State University, the first MG I saw was a TC parked behind the Horticulture building in the spring of 1948.  The size and appearance were quite attractive.  What it was, and where it was made, were not obvious, the owner was not around, and efforts to make contact were not successful as our class schedules were different.  Even after finally meeting the owner, only a minimum of information was obtained.

Some time later when my brother Harley, and I were after parts for our 1933 V-12 Cadillac, we became acquainted with Bob Fergus, a salesman at Columbus Motorcar, the local Cadillac dealer.  Bob had a late ‘48 TC and was required to hide it so Cadillac customers could not see it.  Bob introduced us to Ray Fisher who drove an Ivory TC.  Ray gave me my first ride in a TC.  It was a brief ride around the perimeter cinder road in Franklin Park which circled inside the park near the outside fence.  We were stopped by the park police for speeding on the park road.  The officer demanded my drivers license since I got out of the left side of the car.  Ray offered his license to the officer and was brushed aside.  Finally Ray opened the door on the left side , (the top was up and side curtains on, as the weather was cold), invited the officer , and said “See, no steering wheel”.  The totally confused officer looked at the TC, questioned how the steering wheel could be on the wrong side and couldn’t decide who had been driving, but finally took Ray’s license.  He banned TCs from the park for excessively exceeding the speed limit.

By March 1949 Tom Miller had purchased a ’48 TC from one of the Greiner brothers in Springfield, Ohio.  His brother Phil had gone to Canada and bought a TC, and Don Marsh had acquired a black TC in Indiana.  I don’t know just when, but Dave Lee showed up with a red TC and Chuch Dietrich came down from Sandusky with a BRG TC.  Harley Watts found a used BRG ’48 TC in Dayton, Ohio.  Don Marsh also bought an Ivory TC, he now had two TCs.  By the fall of ’49 there were at least ten TCs in the area which assembled on Sundays for tours and other activities.  Most TC owners drove their cars hard, occasionally drag raced of traffic lights and found every relatively close winding road arounb, many of which were in southern Ohio.

Many, if not most, current “T” series owners have little or no concept of those times.  To better understand them, when the TC was new, a brief discussion of the way things were about 1949 may provide a better perspective.

The population of the Columbus area was about one tenth of that of 1997.  With few exceptions, males between the ages of 21 and 30 had been directly involved in the recently ended world war.  Many men from ages 30 to 50 , had also been in the service in one capacity or another.  Everyone at home had been involved in the war effort, with rationing of most everything.  Also the great depression was a very vivid memory of a not very distant past.  Few families had more than one car.  Most middle class men rode the trolly bus to work or shared a ride with several others.  The street cars had just been phased out, and the tracks with the granite paving bricks between and beside them were being torn out.  Many cars were driven 10,000 miles or less per year.  For a change many more people had money to spend on a car and were eager to do so.

There were no fast food restaurants and restaurants in general were quite sparse.  For most families, eating out was rather rare and somewhat of an event.  The fist shopping center in the US was built by Don Casto on East Broad Street in 1950.  It was only the west end of the present “Miracle Mile”.  Gasoline and tire rationing ended in late 1945 and a desire to take advantage of this was still not fully satisfied by late 1949.  Traffic was light and roads were two lane, much narrower than today’s two lane roads, and not very well paved.

Vehicles on the road around Ohio, when the T cars were new, were leftovers from the ‘30s, if not in fact, they were in design, just like the TC.  Relatively new Fords had 85 hp, flat head V-8s, and torque tube drive.  Chevrolets were straight 6 pushrod engines that relatively recently had gone from 15 psi oil pressure (rod bearings being lubricated by a scoop on the bottom of each rod that dipped into the oil) in the pan – if there was any there- to full pressure of 35 lbs.  Most others were flat head fours, sixes, or eights.  Standard transmissions were normal, three speed on the column which were very sloppy, even when new.  Four speeds were unknown to the average driver.  Electric systems were six volt with the battery under the floor on the front passenger side on many cars.  Windshield wipers were vacuum operated from a hose off the intake manifold.  During acceleration the wipers stopped.  Heaters were poor at best and were re-circulating only (except on Nash cars).  Defrosters consisted of a small after market electric fan on the dash blowing on the windshield, wiping the inside of the glass with a cloth, or driving with the windows open regardless of the temperature.

Antifreeze consisted of two choices, alcohol or Prestone.  Alcohol boils at about 180F, and frequently boiled away on winter days.  Cracked blocks were not unusual.  Freeze out plugs lived up to their name.  “Permanent” antifreeze was drained in the spring, saved, and returned to the cooling system in the fall.

Most cars had 6.00 x 16 tires.  All were tube type.  There were no radial tires.  Normal tire life was about 10,000 miles.  Exuberant driving shortened this.  Retreading of bald tires was fairly common.  Blowouts were all too common.

Starters were activated by pushing on a foot pedal on the floor, except for Buick which was on the accelerator pedal when depressed all the way to the floor.  Power steering arrived in the mid 50s. Vacuum assist power brakes were around from the late 20s, or early 30s on high priced cars only.  Constant maintenance was necessary. “Gas stations” all changed oil, spark plugs, and provided regular maintenance, including washing, and they all pumped the gas as it was against the law in Ohio to pump your own.  Every gas station had a lift or sometimes a pit in the floor with steps down to it.

Many prewar cars were daily drivers.  Model A Fords, early 30s Chevys , Auburns, Hupmobiles, LaSalles, and run of the mill Oldsmobiles, Pontiacs, Plymouths, Studebakers, Kaisers, Henry Js, Mercurys, Packards, Nashes, Lincolns, Willys’, Crossleys, etc were commonly seen daily.  An occasional Model T Ford, Deusenberg, or Cord 810 or 812 or Pierce Arrow was not unusual.  An occasional Cadillac OHV V 12 or V 16 from the 30s was seen.  There was even a Baker electric driven by a little old lady out on East Broad Street.  Semi  trucks were much smaller and slow.  New car transporters were limited to carrying four cars.

About 1950 an Army Air Force officer stationed at Lockbourne AFB was driving his Bugatti Royale to the base from his rooming house on Bryden Road in Columbus where the Bug was parked on the street.  It was offered for sale for $2500 but there were no takers.

Cadillac had introduced the Kettering OHV V-8, which was also in the brand new Oldsmobile 88 in ’49.  It was well known to not keep its tune very well, especially when run hard.  There were more sick “88s” than properly running ones.  Chrysler brought out the Hemi-Head V-8 in late ‘49 or’ 50.  The “cheap” Ford and Chevy first saw V-8s in ’55.  The “performance” V-8 cars were the exception, not the rule, and suspension development had not caught up with engines.  The shock of the acceptance of the small “quick sports car from England” by mainly the young, had yet to sink in at GM, Ford, or Chrysler and other manufacturers.  The Chevy Corvette was still a few years away, and the Mustang even farther.  The early influence, primarily of the MG, is the reason these cars came about, even if they are not “Sports Cars” in the same sense of the word.

As a result, any well driven TC or TD could out drag, and out run, many then current American cars on the road, even on straight roads, and frequently did.  Also, the MAXIMUM speed limit on the best rural State and National highways in Ohio was 50 mph.  Many places it was 25 or 35 mph.  There were no freeways and very few four lane roads, and no radar.  Few MG owners had not been stopped for speeding.  On the open road the Highway Patrol would fall in behind an MG and look for an excuse to stop him.  They frequently would turn around  when an MG was spotted going the other way and fall in behind.  The smart (or smart alec) MG driver would stop and “check the oil”, or take off down a side road, often gravel, and try to lose the “law” This latter tactic usually worked, and was quite successful in advancing the reputation of MGs and other “sports cars”.  Fortunately the point system for violations did not yet exist.

The ten or so TC owners in the Columbus area,……………..STAY TUNED FOR PART 2!

Home

A Testimony of Mechanical Ingenuity

Phil Miller Caricature Cartoon

Mechanical Ingenuity at the 1951 Watkins Glen Queen Catherine Cup

By Larry Watts

(The cartoon featured here was drawn by family friend and racing enthusiast Phil Miller, and depicts the event in satire. Phil was a talented artist)

In an earlier story, I wrote about competitors in the early post war years driving their cars to the track, taping over, taping over headlights and racing all weekend.  If something mechanical broke during the weekend, you had to fix it in order to drive your race car home on Sunday night.  Some creative repairs were made in order to get home after the weekend.

In the late 1940s and early 1950s, MG TCs were a popular race car.  Teggie Ogilvie, Postmaster General of Ottowa, Canada was an MG TC owner/racer.  In the 1951 QUEEN CATHERINE CUP at Watkins Glen, Ogilvie dropped a valve during the race in his TC.  The damage was limited to the one cylinder but the piston and valve were destroyed and no replacements were available that weekend.

With no means of towing the car back to Ottowa from the Finger Lakes, the engine had to be repaired somehow.   The solution?  The boys from the “Wire Wheel Team” in Columbus (principally Harley Watts, MG  specialist)  helped Ogelvie remove the piston, rod, valves, and pushrods from the damaged cylinder.  Next the rod was wrapped in heavy gasket paper held in place by hose clamps.  The engine was then buttoned back up and fired up on the remaining three cylinders .  Even though the engine vibrated badly, the car was driven back to Ottowa, Ontario without further incident.

Home

1989 Road Atlanta WERA Vintage Finals

WERA Vintage Finals

1989 WERA Vintage Finals

The Western Eastern Road Racing Association, known as WERA, holds its annual WERA Vintage Finals at its Garnd national Finals event held each year at Road Atllanta in Braselton, Georgia.

 Ducati mototrans, vintage motorcycle racing

Larry Watts aboard his 1973 Ducati Mototrans 350 at the 1989 WERA GNF Event

This photo (above)  is itself vintage photo in its own right, having been taken in 1989.   Here is Larry Watts in 1989 aboard his 1973 Mototrans Ducati 350 single in the vintage race of that year’s  WERA finals at Road Atlanta, Braselton, Georgia.

If you would like to partake in similar activities in a purely fun and safe racetrack environment, then come and join us.  Once we become established, we just might be holding our own Vintage Finals at a racetrack near you in he southeast!

Visiting Brooklands

Visiting Brooklands | Vintage Era Racetrack in Surrey England

Three wheeled Morgan with JAP engine.

Visiting Brooklands

By Larry Watts

My wife Carol and I visited the Brooklands Motor Racing Circuit Museum in Surrey, England a couple of weeks ago. It is the oldest purpose built motor racing circuit in the world, constructed in 1907.

larrybrooklands2

Brooklands was THE place for motor racing in England up until 1939. Britain’s WW 2 Defense activities ended the racing there in 1939 when the circuit was taken over for aircraft construction and an airstrip was built in the infield.

 

An aircraft construction hanger was built directly on the pit lane and another built on one of the straights thus rendering the circuit useless for racing. Today it is a fascinating museum displaying motorcycles, cars, aircraft (including a Concorde!) and even a London Bus museum.

larrybrooklands5

Large portions of the original banking are still there and you can walk on it. I went there expecting to stay about 15 minutes and spent the entire day there.

 

I highly recommend visiting Brooklands if you’re planning a trip to England. Brooklands is located inside the M25 in the southwest corner of the London metropolitan area.

MG TC Racing in the 1950s

larrybrooklands1

MG TC Racing in the 1950s by Larry Watts

Harley Watts in 1955 with family and his MG TC

MG TC Racing in the 1950s

McDill Air Force Base, Tampa, Florida, 1951

By Larry Watts

(Editor’s note:  Younger readers might not appreciate just how fantastic today’s tires are.  In the 1950’s one would have expected an average set of automobile tires to last no more than a few thousand miles.  Tires have only become as long lasting and reliable as they currently are within the past 30 to 40 years.­)

Harley Watts and Bob Fergus, both from Columbus, Ohio, were two of a group of about eight guys in central Ohio that all owned MG TCs in the early fifties.  Harley was a gifted tuner/car prep guy and Fergus knew how to make a TC sing and dance.  Not that Harley wasn’t a talented driver in his own right.  Together, they campaigned Fergus’s TC for a couple of seasons. (In the picture above is Harley and his family in 1955, with the car as it would have appeared after having been driven to a typical race meeting)

One of the races that the pair entered that year was at the track laid out on the runways of McDill Air Force Base near Tampa, Florida.  After Harley’s usual immaculate car preparation, w new set of four tires was fitted to the car and they set out for Tampa from Columbus, driving the TC.

You see, in those days, NOBODY trailered a race car to an event.  I suppose that there were a few teams with lots of money that had transporters, but that wasn’t the norm.  You drove it to the race, took off the bumpers , taped over the lights, raced all weekend, reversed the process and drove it home on Sunday night.

Anyway, back to Harley and Bob Fergus.  Harley never commented much about the drive to and from Florida, so it must have been uneventful.  The interstate highways were still a dream fifteen years into the future, so all the trip was on two lane highways.  I’m sure that they had to restrain themselves in the twisties in order to conserve the tires.

The race at McDill was a six hour endurance race.  Their TC was entered in F Production.  A LeMans type start saw all classes mixed, same as today.  The faster stuff consisted of Ferraris, Allards, Jaguars, Cunninghams, Porsches, Oscas and others.  At the end of the race after the dust settled and the checkered flag flew, Harley and Fergus won their class bay a lap and a half margin over the second place car, never having been overtaken.  It was Harley’s first National Road Race.  John Fitch driving a Cunningham was the overall winner.

Nothing broke during the weekend thanks to excellent car prep by Harley, one of the best in the business.  Sunday evening they prepped the car for the drive home which proved to be as uneventful as the drive down.  But, think about this.  They drove the car 1300 miles home on one set of 1950’s vintage 4.24 x 19 Dunlop tires!

Yeah. In the 1950s, men were men.  And the drivers were fat and the tires were skinny.

The Fast Ones Embracing Motorsports